Coo-Var Oil Based Floor Paint

Coo-Var Oil Based Floor Paint


A single paint floor coating. Easy to use versatile and economical. Ideal to protect and decorate floors inside and outside.
Not suitable for surfaces that are used when wet "Suregrip" antislip will be preferable in areas prone to being wet.
Safety yellow and white special colours made to order. Please contact us.


Coo-Var Floor Paint is a resilient and hardwearing single pack floor coating designed to be versatile, easy to use and economical in decorating and protecting surfaces including floors.
Suitable for indoor and outdoor use, Coo- Var Floor Paint is compatible over most previous coatings and gives an off gloss finish.
12 colours available.

Recommended Use:

Coo-Var Floor Paint is suitable for use on wood, metal, concrete or glass reinforced plastic.
Floors, walls, ledges and stairways indoors and outdoors.
For foot and light truck traffic use.
Coo-Var Floor Paint protects against dirt, grime, oil, dust and some solvents.
Please contact Technical Services for other surfaces.
Not recommended for use on asphalt, bituminous surfaces or on thermoplastic floor tiles.


0.5 litre, 1 litre, 2.5 litre, 5 litre


Semi Gloss


Tile Red, flint grey, forest green, light grey, dark grey, black, stone, steel blue, tan, bright red.

Estimated Coverage:

10-12 sq metre.

Method of Application:

Apply CooVar Floor Paint with a brush or roller.

Brushwash / Thinners:

Thinners 14.

Drying times:

Touch dry 4 hours
Hard dry 12 hours
Overcoat 12 hours or Overnight.

Surface Preparation:

All surfaces should be clean, dry, sound and free from contaminants.
Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch.
These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months.
Other surfaces have to be prepared and primed with the suitable primer for that substrate.
Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application Conditions:

As dictated by normal good painting practice.
In confined spaces provide adequate ventilation during application and drying.

Preceding Coat:

Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer on concrete.

Subsequent Coat:

Coo-Var Floor Paint

Special Notes:

On unpainted concrete use Coo-Var Floor Paint thinned 10% with Thinners 14. Prime soft wood with Coo-Var Penetrating Wood Primer, hard wood with Coo-Var Aluminium Wood Primer and metal with Coo-Var Zinc Phosphate Primer.
For foor and light traffic use. Compatible with most previous coatings inside or outside.

Sizes Colours
500ml Tile Red
1 Litre Flint Grey
2.5 Litre Forest Green
5 Litre Light Grey
Dark Grey
Steel Blue
Bright Red

Safety Data Sheet

Technical Data Sheet

Click Here to buy this product from our Web Store.